DALI-2 presence sensors, push button interfaces and actuators for operation with BMS
Perfect light management can also be achieved with a higher-level control solution using a Building Management System and presence sensors. Here, the DALI-2 standard ensures compatibility across manufacturers. This allows the Theben DALI-2 presence sensors to be operated with any multi-master application controller that complies with IEC 62386 Parts 101/104.
As an input device, the presence sensor provides information regarding presence detection and light measurements in accordance with IEC 62386 Part 303 or Part 304 via the DALI bus. The higher-level control system is responsible for providing all the functions, such as switching, constant lighting control, fully/semi-automatic device, manual override and scenes.
The presence sensors also support remote control commands for dimming or switching lamps, controlling blinds, or other functions. The presence sensor sends the information via the DALI-2 bus to the higher-level control system as per IEC 62386 part 301. Using the information, it can trigger desired actions. In addition, a compact DALI-2 push button interface and a powerful DALI-2 switch actuator can be integrated into the Building Management System.
Advantages of the DALI-2 presence sensors
- 01 Greater flexibility
as the DALI-2 components can be changed at any time by reassignment without rewiring or programming. - More safety
thanks to interoperability of all DALI-2 components and mandatory certification. - 03 Simple installation
of all DALI-2 components (EBs, sensors, push buttons) on one line reduces time and material costs - 04 Various installation options
as ceiling installation, ceiling surface-mounting or flush-mounting. - 05 High level of investment security
Standardisation ensures compatibility across manufacturers. This makes DALI-2 sensors easier to integrate. The DALI-2 standard is synonymous with high levels of compatibility and security.
The presence sensors from Theben blend in perfectly with the overall appearance of the ceiling.
The perfect solution – all from a single source
DALI-2 presence sensors offer a straightforward and reliable solution for rooms where lamps need to be dimmed or switched, blinds need to be controlled or other functions need to be performed via remote control. theSenda B remote controls (9070985) have an integrated lux meter. This means that the brightness value at the desired measuring point is sent directly to the DALI-2 presence sensor. As a result, the brightness measurement is calibrated virtually automatically. It couldn't be simpler or more convenient.
