Switching mode | Dimming mode |
|
|
You can find all our presence and motion detectors here.
Due to their very fine sensor technology, Theben presence detectors detect even the smallest movements and temperature differences. This allows you to adjust lighting and air conditioning to the exact needs of residents and users. Depending on the model, the various presence detectors are available in black, white, grey, silver or in special colours upon request.
The square detection area is ideal for most rooms in which presence detectors are used. So individual detectors can be placed in the perfect locations without any blind spots, gaps or unnecessary overlaps. This makes planning easier, reduces the installation effort, saves energy and lowers costs because, due to the square detection area, fewer detectors are required in most cases.
The time delay changes automatically depending on people's habits in the room. If the presence detector detects more movement, the time delay is shortened to as little as two minutes. If people hardly move or only rarely, the time delay is increased to up to 20 minutes. This saves energy, boosts comfort and allows people to work in the way that suits them: active and lively or still and focused.
A presence detector misses nothing. This is a particular advantage when the presence detector is integrated in the building system technology of large office or administration buildings. In this way the building management always know which rooms people are still working in.
With presence detectors, nobody trips up – especially not on the stairs. The light can be switched on using the button, but it only goes off when there is no more movement on the stairs. This means that someone who is at the top of the stairs is not suddenly left in the dark because someone at the bottom has switched off the light.
In the event of a short stay,the light is only on for two minutes. Because presence detectors can detect whether and how long someone is in the room, whoever enters the room for a short period of time does not automatically trigger the time delay that has been set, but still does not have to go without light.
Bright daylight or softly dimmed light – you can choose between two lighting scenarios, which you can define according to how the mood takes you. For example, in conference rooms where the light has to be dimmed for presentations. For the very lighting arrangements required in everyday situations. Settings can be made, saved and changed quickly and easily using the remote control.
With a remote control, settings can be easily made and changed from the ground up. This is faster, shortens the installation time and lowers costs. And, what's more, it's safer.
With a remote control, settings can be easily made and changed from the ground up. This is faster, shortens the installation time and lowers costs. And, what's more, it's safer.
With a remote control, settings can be easily made and changed from the ground up. This is faster, shortens the installation time and lowers costs. And, what's more, it's safer.
Some versions have constant lighting control, which continuously compares artificial light and daylight. It determines the desired brightness value from these two light sources. No matter how fickle the weather, the lighting conditions inside the room remain pleasantly constant.
The pulse function allows the presence detectors to be built into existing electrical installations with staircase light timer switches or KNX binary inputs without the need for expensive adjustments.
Presence detectors allow for more than just increasing the detection area via master/slave switching operations. Via master/master/parallel switching operations, the lighting conditions can be set in the detection area of individual devices independently, and thus individually. This is an advantage if, for instance, in open-plan offices, different lighting conditions are to be balanced between areas close to windows and the room's interior.
Lighting conditions change quickly – all the better if you can simply save them when they are exactly how you want them to be. The clever teach-in function allows even end users to save the current lux value for future use, without the need for specialist knowledge. It couldn't be easier.
How sensitively presence detectors respond to movements inside the room is up to you. The PIR sensors can be conveniently set using the remote control – according to the individual requirements of the users.
The "eco" label stands for ideal control options, while "eco plus" stands for maximum energy savings. You decide what is best for you at the push of a button. Exactly how you like it. Exactly how you need it. There's no easier way to save energy.
Presence and motion detectors with protection class IP 54 can also be used in wet rooms such as showers, changing rooms or toilets.
Presence and motion detectors from Theben have a high-performance relay with tungsten pre-contact or a zero-cross switching and can thus handle switch loads of up to 10 amperes. This allows several lamps to be connected at the same time and larger areas, such as loading ramps or hotel premises, to be lit. This gives you peace of mind during planning, lowers costs and reduces installation times.
theMura wall detector is perfect for energyefficient lighting control, e. g. in corridors, stairways, cellars and toilets – available as a motion or presence detector. The 2-wire detectors are most suitable for renovations and conversions in combination with a staircase light timer switch from Theben. The 3-wire detectors can also be used in new buildings and feature practical additional functions as a presence detector.
Thanks to the sleek design, they are strikingly discreet from every angle. They can also be used for any standard switch range thanks to the wide portfolio of available accessory sets. Simply clever. Simply beautiful. Simply Theben.
The lighting can be switched on and off manually using the integrated button. If this function is not required, it can simply be deactivated.
With theMura, nobody trips up. Not even on the stairs. The light can be switched on using the button, but it only goes off when there is no more movement on the stairs. This prevents someone from being suddenly left in the dark because someone else has switched off the light.
Lighting conditions change quickly – so it’s good when you can simply save them when they are exactly how you want them. The current lux value can be permanently saved using the teach-in function. Without specialist knowledge. By the end user. It couldn’t be easier.
The orientation light ensures increased safety in corridors and stairways. After the automatic switch-off of the main light, it remains activated for an adjustable run-on time or permanently (depending on the brightness levels). Be on the safe side.
In rooms such as toilets, it may make sense to let the noise level decide whether the light should be switched off. With theMura, the integrated microphone can also be used to specify the run-on time. Completely practical.
In order to use all of the functions, theSenda B remote control needs to be used in combination with the free theSenda Plug app.
Presence detectors from Theben are the perfect solution for presence-dependent and efficient lighting control. With a detection area of up to nine metres, theRonda S standard presence detectors are especially well suited to smaller offices, ancillary rooms with daylight and wet rooms. The P performance range of the theRonda detectors really come into their own in environments such as open-plan offices and classrooms, thanks to a detection area of up to 25 m and Master/Master parallel switching.
theRonda DALI presence detectors now combine all the advantages of the DALI bus system with the legendary standards of premium quality delivered by Theben – all wrapped up in an intelligent, efficient and flexible package. They can also be connected to conventional buttons. Customers can select freely from all common switch ranges and enjoy maximum freedom of design.
The assignment of the buttons to individual lighting groups can be changed without any problem, even after installation. This does away with the need to make complex adjustments to the wiring. With theRonda DALI presence detectors, up to three lighting groups can be controlled using just one DALI line – saving you significant amounts of time and money during installation. If a DALI operating device needs to be replaced and a new one is installed, the presence detector identifies the new one automatically and performs configuration itself.