Electromotive actuator CHEOPS S KNX with integrated controller and temperature sensor

The new electromotive actuator CHEOPS S KNX from Theben is the perfect solution for controlling heating and cooling systems in KNX building automation. The powerful drive offers the perfect combination of high maximum actuating force of up to 220 N, great flexibility thanks to two binary inputs and maximum security thanks to KNX Data Secure.

CHEOPS S KNX Stellantrieb 1290x726px

Advantages of CHEOPS S KNX at a glance:

Theben_CHEOPS S KNX_Advantages
  • High actuating force: Up to 220 N at a maximum valve stroke of 8 mm.
  • Integrated controller: For heating and cooling with one additional stage each.
  • Integrated temperature sensor: No external temperature sensor necessary.
  • Two binary inputs: Connection option e.g. for external temperature sensor, window contact, presence detector or push button.
  • Flexible usage: Universally usable due to large range of valve adapters and automatic valve adaptation.
  • Additionally 2 different valve adapters included for most common valves M30x1.5 and Danfoss
  • Theft and tamper-proof: Removal only possible with tools.
  • Maximum security: KNX Data Secure support protects against data theft and manipulation.

How does an electromotive actuator for KNX work?

Motorised actuators such as the CHEOPS S KNX use a motor with gearbox for valve control in KNX systems. The gearbox converts the rotary movement into a stroke. The actuator works as a proportional drive, and permanently maintains the required opening degree, in contrast to a thermal actuator. Thanks to the integrated bus coupler, the device is connected directly to the KNX bus. A separate KNX heating actuator is not required. The supply voltage is obtained from the KNX system. With the automatic valve stroke detection and the integrated LED display, the current status of the valve can always be clearly seen.

What is the difference between electromotive and electrothermal actuators?

While motorised actuators use a motor and a gearbox, thermal actuators use a heating element. It expands when voltage is applied. The expansion is then transferred to the valve. Control is via pulse width modulation. Other than electromotive actuators, thermal actuators require an additional KNX heating actuator such as the Theben HMT 12 S KNX for use in heating circuit distributors or the heating actuators of the MIX2 or FIX series.

I agree that external content may be displayed to me. Personal data can thus be transferred to third party platforms. For more information, please see our privacy policy.

Where are electromotive actuators used?

Motorised actuators such as the CHEOPS S KNX are ideal for controlling the room temperature in heating and cooling systems in KNX building automation. For example, on conventional heaters, heaters with integrated valve sets, radiators, convectors, heating circuit distributors on underfloor heating and ceiling cooling systems. The devices are used in office, administration, industrial and residential buildings with KNX systems.

CHEOPS S KNX Schmuckbild 1290x726px

What are the options provided by electromotive actuators in KNX systems?

Motorised actuators such as the CHEOPS S KNX have an integrated temperature sensor and an integrated room temperature controller for efficient heating and cooling, each with an additional stage. Therefore, external devices for temperature measurement and control are not necessary. Even the use in heating circuit distributors is possible. Also, a logic for connecting up to 10 window contacts is integrated. In addition, the motorised actuators offer two universally usable binary inputs. They can be used, for example, to connect an external temperature sensor or presence detector. Other functions include:

  • Switching
  • Dimming
  • Blind controls
  • Universal valuator
  • Window contact
  • Remote temperature sensor
KNX-Data-Secure

How do you install an electromotive actuator?

Electromotive actuators such as the CHEOPS S KNX are simply plugged onto the previously mounted valve adapter and locked. Valve adapters for M30 x 1.5 mm and Danfoss RA are included in the scope of delivery as standard. Further valve adapters for almost every manufacturer are optionally available. To remove it, tools are required. Therefore, theft or sabotage are largely excluded.

 

What are the advantages of KNX Data Secure?

CHEOPS S KNX and all new KNX components from Theben support KNX Data Secure. Communication in the KNX network is encrypted and secure data transmission of telegrams is ensured. This means the KNX system is optimally protected against data theft and manipulation.

Theben_CHEOPS S KNX actuator

CHEOPS S KNX

  • Motorised KNX actuator for heating and cooling valves
  • Integrated temperature sensor
  • Integrated controller for efficient heating and cooling with one additional stage each
  • High actuating force of up to 220 N with a maximum valve stroke of 8 mm
  • 2 universal binary inputs, connection option e.g. for external temperature sensor, window contact, presence detector or push-button
  • Integrated logic for up to 10 window contacts
  • Can be used in the heating circuit distributor
  • Integrated bus coupling unit
  • Automatic valve adaptation
  • Universally applicable due to large range of valve adapters
  • 2 different valve adapters for the most common valves M30x1.5 and Danfoss included (VA 10, VA 100)
  • Secure commissioning and communication through support of KNX Data Secure
To the CHEOPS S KNX
Theben_CHEOPS Control KNX actuator

CHEOPS control KNX

  • Motorised actuator for heater valve or for controlling the heating valves
  • Independent room thermostat and integrated temperature sensor
  • Manual operation possible via 2 keys on the device
  • Display via LEDs (red/blue for hotter/colder)
  • Configurable as: Heating control (continuous control),two stage heating, heating and cooling
  • 2 inputs for window contact, presence detector, temperature sensor
  • Display of valve stroke
  • Automatic valve stroke recognition
  • Simple installation by clicking onto valve adapter
  • Can be used in heating circuit distributor
  • Integrated bus coupling unit
  • With summer mode and valve protection
  • 2 different valve adapters included (VA 10, VA 78)
To the CHEOPS control KNX
Theben_CHEOPS drive KNX actuator

CHEOPS drive KNX

  • Motorised actuator for heater valve or for controlling the heating valves
  • Without integrated control
  • Display via LEDs (red)
  • 2 inputs for window contact or presence detector
  • Display of valve stroke
  • Automatic valve stroke recognition
  • Simple installation by clicking onto valve adapter
  • Can be used in heating circuit distributor
  • Integrated bus coupling unit
  • With summer mode and valve protection
  • 2 different valve adapters included (VA 10, VA 78)
To the CHEOPS drive KNX
Theben_CHEOPS_actuator_valve_adapter

Valve adapter

  • Flexible adaptation due to large range of valve adapters. They are available through our service.
  • Valve adapters for Onda, Schlösser(from 1993), Oventrop (M30 x 1.5), Heimeier, Herb, Therm-Concept, Frank, Roth (distributor), Dinotherm (distributor)
To the valve adapter
Theben_CHEOPS S KNX_Floor sensor

Floor sensor

  • Temperature sensor for installation in the floor with protection class IP65
  • Temperature sensor for laying in floor
  • Type of protection IP 65
To the temperature sensor
Theben_CHEOPS_actuator_temperature_sensor

Flush-mounted temperature sensor

  • Temperature sensor for flush mounting. Compact design for easy installation in switch/junction boxes.
  • Temperature sensor for flush-mounting
  • Compact design for easy installation in switch / distribution boxes
To the Flush-mounted temperature sensor
Theben_CHEOPS S KNX_RAMSES Temperature sensor

RAMSES IP65 temperature sensor

  • External room temperature sensor with protection class IP 65.
  • External room temperature sensor
  • Protection class IP 65
To the RAMSES IP65 temperature sensor